We are very proud to have supplied since 2019 to factories in SE-Asia 10 complete Extrusion Lines to manufacture MEDICAL TUBES based on SPVC material with OD 1.95mm and speed running at 30 m/min.

The Extrusion Line consist of the following:
– Single Screw Extruder LUMEN 50-28
– Co-Extruder if the tube requires a Blue Pigment Stripe
– Cooling Tank
– 2-Track Haul-Off and Servo Fly-Cutter
– Online Diameter Gauge Meter
– Conveyer

A full video clip of the line can be seen on our Youtube Channel under   https://youtu.be/Li5VxrXN80M

Individual pictures of the machines can either be seen on our FB page or please contact us.

If you require full specifications of the line please contact our wordwide offices.

We are proud to have supplied a complete Single Screw Extrusion line to produce HDPE pipes up to 800mm pipe diameter.

The latest technology was implemented in our extrusion machines.

Our Single Screw Extruder type LUMEN 120-38 with output of 1200 kg/h, using an European High Torque gearbox, latest screw design in combination with a helical grooved barrel. High AC drive and inverters ensure troublefree production. Furthermore the extruder is equipped with a gravimetric feeding system, Auto-loader, Hopper dryer and 2 day bins.

High volume HDPE Pipe Head type SMHPE800 includes a special spiral design for high throughput.

A fast and smooth cooling is guaranteed with our Vaccumtanks type SMVST800 and Spraytanks SMST800, using powerful spray cooling with a speedy vacuum adjustment.

HMG Extrusions 6-Track caterpillar Haul-Off type SMHA800 is equipped with Servo Motors for each track to ensure steady pulling even at low speeds.

Our Swarfless Cutter type SMSCS800 based on latest generation design, uses a dust-free planetary type system with PLC control.

For detailed information and leaflets with available machine specifications please contact us at any time. We are looking forward to receive your enquiries  Please contact us for additional information, or check our website www.hmg-extrusons.at for further information.

In Co-operation with a high profile partner and due to high market demand we have decided to include Polyolefine Butt Welding anf Angle Cutting Machiens in our portfolio. 

We are able to offer the latest technology for BUTT Welding as follows 

1. For butt fusion welding of plastic pipes and fittings made of PE, PP and PVDF

2. For pipes sizes 200mm up to 1200mm The latest technology includes a low starting pressure to ensure reliable welding quality.

The machine is made of lightweight and high strength material, a simple structure and is easy to operate  Our ANGLE Cutting machines are suitable for cutting pipes according to specific angle and dimensions (Elbow, Tee or Cross). The machine will work with lower material waste and improve the welding efficiency. 

For detailed information and leaflets with available machine specifications please contact us at any time. We are looking forward to receive your enquiries  Please contact us for additional information, or check our website www.hmg-extrusons.at for further information.

High Speed Dual Strand Extrusion lines for either PVC or Polyolefine type pipes are an excellent way to enhance your production output and at the same time get the advantage of saving space.
We are able to offer the latest technology with 3 type of packages 


1. For pipe production up to 63mm (20 – 63mm) pipe size – up to 75mm on special request 

2. For pipe production up to 110mm (32 – 110mm) pipe size

3. For pipe production up to 160mm (63 – 160mm) pipe size

Extrusion Lines can be completed with our Inline Automatic Socketing Machines with a new type of fast and accurate Infrared heating process.
The Dual Strand extrusion lines can be combined with existing extruders, any type of new extruders and our own high quality built HMG Extrusions single or twin (conical or parallel) screw extruders 
Pictures of a recently supplied extrusion line for PVC pipes up to 63mm attached.

We are looking forward to receive your enquiries

Please contact us for additional information, or check our website www.hmg-extrusions.at for further information.

It has been a success story since opening our manufacturing plant in Germany, a state of the art production centre for all types of single and parallel/conical twin screws and barrels. We have supplied many sets and established ourselves as a reliable OEM supplier for several world class plastic machine manufactures. Single and Twin Screw Technology that meets your demands, HMG Extrusions can offer all types of screw flight coatings and nitrided / bimetallic barrels for wear resistent purposes. 

  • Advantages of choosing HMG Extrusions for your replacement screws and/or barrels.
  • Several types of Bimetallic Inliner against fast wear for different applications
  • Screw Flight coatings for Twin Screws (Molybdenum, Vanadiumchrome and Tungstencarbide)
  • Thermal coatings for special applications (WOKA 3660FC and AMPERIT 551) 

We are looking forward to receive your enquiries  

Please contact us for additional information or check our website www.hmg-extrusons.at for further information.

We are glad to let you know that we have finally moved to our new location in Großefehn Germany, a state of the art manufacturing centre for all types of single and parallel/conical twin screws and barrels. Single and Twin Screw Technology that meets your demands, HMG can offer all types of screw flight coatings and nitrided / bimetallic barrels for wear resistent pruproses Diameter sizes from as small as 35mm up to more than 160mm and maximum length of 5 meters.  Existing screw geometries or, on demand, special designs to meet your production needs can be offered.

We are proud to have manufactured and supplied our newly designed HMG Extrusions downstream machines up to 660 mm suitable for UPVC, HDPE pipes with the following specifications:

SMVST660 & SMST660: Vacuum + Spray Tank with high quality Stainless Steel Tank, slim design with the pumps positioned under the tank, efficient spray nozzles for enhanced cooling and water saving, tempered glas covers.

SMHC660: 6-Track Caterpillar Puller with high quality, easy exchangeable rubber pads. Individually servo controlled tracks guarantee a smooth pulling of the pipes from 0.6 – 6 m/min.

SMSCS660: Swarfless cutter ensure a material cost saving machine, based on a stationary blade which rotates 360° by means of a mechanical drum to guarantee a uniform cut up to 77mm thickness.

 

SMHC660

SMSCS660

SMVST660

SMST660

SMSCS660-1

We have the pleasure to present HMG Extrusions newly designed SWARFLESS CUTTER UNITS
They are based on a stationary blade which rotates 360° by means of a mechanical drum to guarantee a uniform cut.

The movement of the table is pneumatic activated as standard, for higher speeds servo motor activated movement can be supplied.

Swarfless Cutters are available in following sizes:
SMSCS 63, up to 63mm (2″)
SMSCS 110, up to 110mm (4″)
SMSCS 160, up to 160mm (6″)
SMSCS 250, up to 250mm (10″)
SMSCS 315, up to 315mm (12″)
SMSCS 400, up to 400mm (16″)
SMSCS 500, up to 500mm (20″)
SMCSS 630, up to 630mm (24″)

SMSCS110

SMSCS110

SMSCS110

A new coating technology is available for twin screw flights (conical and parallel types) based on a Vanadium-Alloy material (Product Specification X-FeCrV15). In combination with HMG Extrusions high quality nitrided barrel the VCr-coated screw flights will increase the lifetime by approx. 1.5 times vs. a standard Mo-coating at the same cost level. The higher wear resistance is achieved due to hard carbides with exceptional metal to metal wear bearing properties. The coating is applied by a LASER WELDING method which ensures a perfect bond to the base material. Take advantage of this new technology for your future purchases of replacement screws and barrels and ask us for an offer or for additional specifications.

       

We are glad to inform you that we have decided to take the momentous decision to establish a new Limited Company located in Cologne, Germany, messrs. HMG Extrusions Germany.  We are now in a position to produce high quality Conical/Parallel Twin Screws and Barrels at very competitive prices with following technical specifications

  • Screws and barrels of up to up to 5 meters in length can be produced with any given diameter.
  • material for screws 1.8519 steel and for the barrels 1.8550.
  • Screws and barrels are nitrided to a depth of 0,8 mm.
  • Molybdenum coated screws use the latest LASER WELDING Technology and are coated to a depth of 1.5 mm.
  • Hard chrome plating of screw flights, or the screw root, is available if required.
  • Bimetallic liners that extend the life-time of parallel barrels are available. 
  • State of the art QC department to ensure that supplied units will be of the highest possible quality and meet the required standards.
  • Any enquiries regarding single screws or barrels, as well as specialized screws/barrels are welcomed.