|
|
|
  |
|
| 1. PROFILE VACUUM CALIBRATING TABLE |
| 1 unit |
Stainless steel tank thickness 3mm x 6metre length x 900mm width.
with S/S Angle support on bottom support and end side to mount calibrator. |
| 1 unit |
of Stainless Steel Tray 1.5mm thickness x 7metre mounted onto the bottom of tank contain spillage or overflow water and drain it back to water tank. |
|
| 1 unit |
of Stainless Steel tank with inlet and level ball float stopper and outlet to pumps and discharge valve. |
| 2 unit |
3HP. CALPEDA - Italian water pump mounted to bottom frame piping c/w filtering system outurned to outlet ports c/w pressure gauge,130 ports, valves and other accessories. |
| 5 unit |
4.5 kw.SIHI - GERMAN vacuum pump mounted to bottom frame piping towards to vacuum section - c/w Vacuum gauge, 30 ports, valves and other accessories. |
| 1 unit |
Bottom frame 2 rails 2 metre.
Handwheel drive for drawing the tray left / right adjustment motorised.
Driven for tank forward / backward. |
| 1 unit |
Electrical control box pumps, motors temperature controller. |
| 1 lot |
P.V.C. hose water cooling system, 2 unit of pressure gauge and others accessories components. |
|
|
|
|
2. HAULOFF PH-H 800 X 2400 - HIGH TORQUE
|
| 2 Unit : |
800 mm width track hauloff length 2.4 contact length |
| 1 Unit |
15 hp. motor with flux vector control for variable speed (WATTS-Austria) |
| 1 Unit |
Force cooling A/C vector motor (MARELLI – Italy ) |
| 1 Unit |
Main wormgear drive for speed reduction capacity 15hp ( WATTS - Austria) |
| 2 Unit |
160mm dia.x 200mm stroke, pneumatic cylinder for clamping cushioning on to while pulling profiles/pipes (FESTO-Germany) |
| 2 Unit |
Wormgear Box mounted to the track plate to drive chain link by drive shaft. (UNIRID-Italy). |
| 4 Unit |
Support and guide mounted with nylon sheet. |
| 2 Unit |
Adjustable Flange Bearings for tensioning chain ( NSK-Japan). |
| 6 Length |
RS 80 x 2P sprocket to drive track rotation (STAR- Japan). |
| 4 Unit |
Pillow Block Bearing (NSK-Japan). |
| 4 Unit |
Guiding rollers for Profile / Pipe in and out of track. |
| 8 Pcs |
RS 80 sprocket on guide rail support. |
| 1 Lot |
Single attachment Chain Link type RS 80 (ISUBAKI - Japan). |
| 1 Lot |
Twin attachment Chain Link type RS 80 (ISUBAKI- Japan). |
| 1 Unit |
15 metre extension speed controller . |
| 1 Lot |
Festo Valves and control. |
| 1 Lot |
Rubber pad reinforced with metal base - 300m length x 48m width. |
| |
|
|
Main structure of equipment made of hollow section with height adjustment.
Wheel adjustment for bottom track for centering.
Entry In and Out width 1100 x height 500
Option rubber and V pad / Flat Pad.
|
|
3. SAWOFF (CAPACITY 860 X 100) MODEL PHS 860 PROFILE
|
| 1 Set |
860mm Cross Sawing with Linear Motion Bearing |
| 1 Set |
1,500mm Linear Motion Bearing Travel Length (Ina Germany) |
| 1 Unit |
Dust extractor 3 hp. c/w Filter and Bag |
| 1 Unit |
System control panel components of TELEMECANIQUE contactors Izumi timers, relays, limit switches and FESTO PLC. |
| 1 Unit |
300mm Friction Circular saw |
| 2 Unit |
Guiding plate with adjustment |
|
FESTO pneumatic cylinders valve and controls
Frame made of hollow section with height adjustment up to 0.9-1.1
Swing Up cover for safety and viewing 3 Hp. ELEKTRIM motor.
Machine will saw from top side to bottom side and cross all way to 900mm
|
|
4. TIPPING TABLE 860mm x 3 Metre
|
| 1 Unit |
Made of hollow section c/w FESTO pneumatic cylinders and valve. |
|
|
;)
;)
;)
